Logitech Harmony 600,650,665,700 ButtonWorx™ Button Repair With Deoxit Gold Swab

ButtonWorx™ 

Logitech Harmony Button Repair Kit

Put-In-Place means there are no small individual parts that need to be stuck down. It's easier to install and easier to remove. It's larger than the condensed peel-and stick version so requires more time and materials to make.

Put-In-Place Logitech Harmony Button Repair Pad

The ButtonWorx™ membrane keypad permanently fixes the buttons by inserting a new keypad between the original buttons and the circuit board. New electrical contacts that never wear out like the rubber keypads do and it blocks any oil or dirt from causing problems in the future.

• • Crazy simple installation! 
• • Carbon film that never wears out
• • No Paint or glue that would chip and flake off
• • Tested for over 1 million button presses with no sign of wear

The ButtonWorx™ membrane keypad permanently fixes the rubber contact buttons by inserting a new keypad between the original buttons and the circuit board.  New electrical contacts that never wear out like the rubber keypads do and it blocks any oil or dirt from causing problems in the future. Volume, Channel & directional keys are metal snap domes. Most people do not have trouble with these buttons but if they are acting up, ButtonWorx™ will not fix it. Metal dome switches can be cleaned with Deoxit D100L

Logitech Harmony 600
Logitech Harmony 650
Logitech Harmony 665
Logitech Harmony 700

• • Carbon film that never wears out
• • No Paint or glue that would chip and flake off
• • Tested for over 1 million button presses with no sign of wear

Tips: 

If you are not having trouble with the snap dome keys Don't Repair Them
Volume, Channel, Play, Pause, Arrows and OK
If you are having trouble then I recommend Deoxit GOLD G100L (available as an optional add-on). You could also use Isopropyl alcohol. 

If you don't often use the number buttons at the bottom of the remote, don't worry about them. Just install the repair pad
If you DO use the number buttons or if you are already having trouble with those buttons, then I recommend peeling back and cutting the bottom of the white sticker found on the circuit board and attaching it to the top of the repair pad. This makes a significant difference in how easily those buttons respond to a light button press.

** Did a pet rabbit eat a remote button? ButtonWorx can't replace missing buttons but sending your remote in for button repair with "Professional Installation" option may be a solution. As long as you don't care too much what the buttons look like (they will be pulled from parts remotes) a few buttons can be replaced (subject to availability). If your remote is missing more than a few buttons please contact us with photos first.