New LCD Glass for Fireplace Remote (Vermont Castings, Honeywell, Kozy Heat, Lennox, etc..)

For other issues you can get this remote repaired at P1Repair

This part is just the glass - No other LCD parts included such as metal and plastic frame or zebra strips. 

Normally if your LCD glass is broken you will clearly see black splotches, cracked glass, etc...
It is unusual for the LCD to be broken without any obvious cracks and spots

It is possible for corrosion on the board to make the LCD blank or strange characters on the display. A new glass will not fix the problem. Please only replace the glass if you can SEE that the glass is broken.

Please see all the photos in the details

STEPS:

1 Bend 4 metal tabs to remove old LCD from board

2 Remove old glass (caution if there are glass shards!) 
There will be 2 pink ZEBRA strips that sit in slots. These will seem stuck to the glass but they are easily removed
The glass itself may be stuck tightly in the plastic backlight

Note: the remote has a backlight but I've never seen it work so I assume they turned off the feature in programming to save battery

3 Place new glass with the bump on the edge facing left. It is a tight fit into the plastic frame.

4 Place the pink zebra strips into the slots

5 Replace the metal frame with rounded side on the top

6 Place the 4 metal tabs back through the housing and bend with pliers to hold it in place