SynScan V4 Telescope Controller Keypad Repair Membrane
$9.50
Ships World Wide by Letter Envelope!
Security policy
No data sold or shared. NO SPAM!
Economy Shipping
Sent by Letter Mail - No Tracking
Return policy
90-day money back guarantee
.png)
USD
$ Indicates prices are in USD
ButtonWorx™ Button Repair Kit
SynScan v4
Do-It-Yourself
- Permanent Repair
- No paint ink or glue
- Will not chip or flake off
- Tested over 1 Million button presses!
- Blocks dirt and oils forever
Permanently repairs rubber keypad buttons by replacing the conductive material.
Your buttons fails when the conductive pad wears out and silicone oils seep from the keypad. This gooey paste blocks electrical conductivity and stops the switch from working.
The ButtonWorx membrane keypad blocks dirt and oil from reaching the circuit board and offers a new conductor that cannot break down like rubber conductors do.
Note: This is for repairing hard to press buttons. If all your buttons stopped working one day, then the remote is broken (not the buttons) and needs repair
This is what it looks like when you remove the back cover
IMPORTANT: Clean the button contacts with Isopropyl alcohol and q-tips.
This shows the ButtonWorx™ membrane installed over the buttons
Install the membrane as flat as possible. Just lay it over the PCB after lining up the holes and leave it alone. DO NOT press down to "stick it better" That is not necessary and you can create problems with buttons caving in which could make them activate without pressing them first.
BW_SysScanV4
85 Items
Customers who bought this product also bought:
Comments All reviews
Ships World Wide by Letter Envelope!