I have been working on a Ceragem 3500 massage bed . The remote control
did not work at all so I disassembled the remote and operated the
contacts with a pencil with a foil candy wrapper taped over the end.
This allowed me continue diagnosing the machine. I have been messing
around with this machine since mid December. There is no useful
documentation available on the internet, certainly no circuit diagrams,etc.
Today I replaced the contacts in the remote control, the machine works
correctly, and I suspect that that is all that was wrong to begin with.
To think, I spent $300, was told to spend another $300, when the fix
probably was the $10 I spent on the Buttonworx repair.
Long story short, thanks for the repair.
Jim
Photo with ButtonWorx™ installed
Buttons repaired using Universal 5mm buttons