I want to thank you for the Button Repair Kit, it really helped and the
buttons work again.

I repaired the buttons of our door intercom devices (I hope it is the
right word. If not: I mean the devices which you use to talk to the
people at the door of your house when they ring the bell) with it
because almost all buttons didn't work anymore.

While the talking to the person who rings was still possible without
pressing any buttons, the remote opening of the door and the calling to
the door intercom device on another floor wasn't. The repairing was
especially important for my grandma because her ability to walk long
distances isn't as good as it has been, so it is really a blessing for
her that the devices work again. I added some pictures of the repairing
(picture Step_1.jpg to Step_7.jpg).


I had no problems with the repairing but after I repaired the devices I
realised that the pads caused a small problem. The buttons used to be
able to blink to react to the button input or to display a signal. The
LEDs for the buttons are at the center of the button (I attached two
photos to the E-Mail (Before_installation_1.jpg and
Before_installation_2.jpg)) and since the pads are black and not
transparent they block the light of the LEDs.

It isn't a big problem because most of the time the LEDs display no
really important information and it is better than if the buttons
wouldn't work. But I wanted to ask if you also have some pads that have
a transparent center. In the picture of one of your products on your
website I saw a pad that looks like it has a transparent center
(https://buttonworx.com/universal/6-48-button-kit.html).

So i wanted to ask if it is possible to get at least 24 pads with a
transparent center (if you have some). The diameter of the pads should
be between 6 mm and 9 mm (8 mm would be ideal) and the diameter of the
transparent center in it should be between 1 mm and 4 mm (2 mm would be
ideal).


Thank you!